ModMax OEM Replacement Pistons are a great choice for a rebuild or an upgrade to change compression for street and mild race applicatons. These pistons are precision cast from High Silicon Hypereutectic aluminum alloys to exceed OEM specs. The special alloy allows for great heat transfer, low expansion for tight sealing, and even material distribution through the alloy to eliminate weak spots. They will fit all 4.6 SOHC or DOHC 2V or 4V engines (NOT 3V), or all 5.4 2V, 3V, or 4V engines. Any of our standard replacement ring sets or upgraded rings will fit these pistons. Whether you have press fit or bushed rods these pistons are equipped with retaining locks for the pins so they can work for either rod application.
Bore Sizes: Standard (3.552"), .020" over, .030" over
Compression Distance: 1.210"
Dish Volume: 19cc (Dished) no valve reliefs
Pin Size: OEM .866" Piston Pins - Standard Wall
Pin Retention: Full Floating with lock rings
Ring Sizes: 1.5mm-1.5mm-3mm
FOR YOUR COMPRESSION RATIO WITH THESE PISTONS PLEASE SEE THE CHART BELOW
im new to the Mod Motor scene. had a few follow up questions on my parts and they responded promptly with what i needed. that coupled with speedy delivery has helped me find a new home for ALL of my 2000 stang vert upgrades!
