Part # 91025135R is for a cast steel 4.6 stock stroke crankshaft with a 6 bolt flywheel flange.
If you are doing a rebuild and need a great OEM Stock replacement crankshaft kit for your 4.6 engine, then this is the crank for you. Each crank is precision ground to exact tolerances on the latest CNC machinery for a precision fit and function. Ra standards are met for all journal surfaces. Crankshafts are micropolished and profilometer tested for finish quality and integrity. All snout and flange threads are inspected and chased. Plus, each crankshaft includes the properly sized rod and main bearings.
This crank may be used in any 4.6 block (Romeo, Windsor, or Aluminum).
NOTE: Please choose the EXACT block you will be using for the proper bearings to be included with the crank.
Kits can be UPGRADED to HIGH PERFORMANCE bearings by checking the "Bearing Upgrade" box for an additional charge.
|
|
Stroke |
Main Size |
Rod Pin |
Rod Length |
|
910-25135R 4.6L Crank |
3.543" |
2.657" |
2.086" |
5.933" |
