PLATINUM SERIES LIGHTWEIGHT PISTONS GEN 3 COYOTE 5.0 1cc DOMED
Manley pistons are machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life. Perfect ring groove to skirt squareness is achieved through our unique "one fixturing" manufacturing method that assures maximum horsepower. Roundwire locks, chrome moly wrist pins and pressure balance grooves are included with every set at no additional charge. These COYOTE Pistons include valve reliefs that will accomodate 1mm oversized valves. FOR YOUR COMPRESSION RATIO WITH THESE PISTONS PLEASE SEE THE CHART BELOW
NOW WITH FULLY COATED SKIRTS!
Dish Volume: 1cc Dome
Compression Height: 1.165"
Standard Bore: 3.662" (Available in .005" and .010" over)
Top Ring: 1.2 mm
Second Ring: 1.2 mm
Oil Ring: 3 mm
Deck Thickness: .200"
.225" Down Top Ring
Offset wrist pin
Pin Included: Chrome Moly steel P/N 42207 ( .150" wall, 2.500" long )
Round Wire Locks: P/N 42270 - .061" wide
Recommended Piston Clearance: .003" measured .850" from bottom of the oil ring
COMPRESSION RATIOS | OEM 4V Head |
1cc Dome with Gen 3 Coyote Engine | 11.0:1 |
