BUILTTO LAST
Manufacturedfrom our proprietary blend of steel on a near net forging for structuralsupport and durability, these connecting rods are factory replacement, raceready straight out of the box.
TECHNICALELEMENTS
Rodsare supplied with WMC H-11 Tool steel bolts, have a C-C length of 5.932, withBig End Hone of 2.2394, and Pin End Hone of 0.8672 for a total weight of 613grams. After rigorous R&D the Bullet 4.6 Ford Modular rods have beentorture tested and rated for 1100+ HP, 30+ psi of boost and 8500RPM.
Partnumbers:
ID:8765, P/N: BF50-5932
Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.
All heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.
All Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.
